Picture Name

News Details


As always, depending on the quality, reputation as life, continuous innovation to create good, improve quality

Introduction of PVC composite film


Composite film refers to a new packaging material composed of two or more films combined together. Composite film is the fastest-growing packaging material in recent years. The reason for its rapid development is that a single variety of film can no longer meet the requirements for effective protection and beautification of commodities. The composite film can take advantage of its shortcomings and become a packaging material with excellent performance. At present, there are hundreds of varieties of composite films, and the number of composite layers has also developed from the initial two layers to more than 10 layers.

   Composite film is made of plastic film as the base material, and then compounded with other materials, such as paper, aluminum foil, cellophane, etc. Its main performance is as follows:

1. Good heat sealability. Many films, such as stretched polypropylene and polyester, have poor heat sealability. However, compounding with polyethylene with excellent heat sealability can greatly improve the heat sealability. The vinyl film is the inner layer;

   2. Good air tightness, moisture resistance and heat resistance. Cold resistance, fragrance retention, UV resistance and other properties can effectively protect commodities, especially beneficial to: preservation of food;

   3. Good product performance, composite film has better transparency, lightness, good printability, suitable for decoration, plus rigidity, stiffness, good shelf effect, attract customers;

   4. It has excellent mechanical properties, it has good tensile strength, impact resistance, tear resistance, puncture resistance, bending resistance, pressure resistance and other properties, plus good adaptability, which is convenient for mechanized operation;

   5. Lower. Under the premise of ensuring comprehensive performance, it can adopt a method of matching high and low-cost materials to manufacture composite films, so the total cost is low.

   6. Lighter, easy to carry, it can replace some metal cans, glass bottles and other packaging containers, the weight is greatly reduced, it is also convenient for transportation, easy to carry, and also easy to open.

Related News


UV Absorber UV-327: Introduction to UV Absorbers

UV absorbers, as absorbers, are currently the most widely used type of light stabilizers in China. According to their structural design, they can be divided into the use of salicylic acid and its esters, benzophenones, benzotriazoles, and substitution for the production of triazines. The most widely studied industrial applications are benzophenones and benzotriazoles. Quenching agents mainly form complexes with metals, such as divalent nickel complexes, which can be used in conjunction with ultraviolet absorbers to achieve synergistic development.


Seven main antioxidants

1. Antioxidant DLTP: White crystalline powder, melting point around 40 ℃, low toxicity, insoluble in water, soluble in benzene, carbon tetrachloride, and acetone. Used as an auxiliary antioxidant for polyethylene, polypropylene, ABS, and polyvinyl chloride resins, it can change the heat resistance and oxygen resistance of products. The general dosage is 0.05%~1.5%


Polyethylene glycol standard

Determination of molecular weight and polydispersity of macromolecular polymers by gel permeation chromatography (GPC) has been widely used in various industries due to its advantages of simple operation, economy and speed. For this method, when determining the sample to be tested, it is necessary to select a standard sample to make the standard curve. Therefore, for accurate determination of the molecular weight of polymer, the correct selection of the standard sample is particularly important.


Misunderstanding of preservatives

In response to the problems in the use of food preservatives and people's misconceptions about preservatives, the China Consumer Association solemnly reminded consumers in the second consumer warning in 2001: to have a correct understanding and rational view of preservatives in food, and to master common knowledge about food preservatives, so that they can make clear choices when purchasing food; Children, pregnant women, and other special populations belonging to a special period of physical development should be given special protection in terms of food intake. It is recommended not to give them food that uses too much preservatives to ensure their physical health; When choosing food and beverages, try to purchase products with credibility and quality that can withstand market tests, as the use of preservatives in these products is more cautious and reliable, and the labeling is often more authentic; Do not easily believe the claims made by some small and medium-sized enterprises in product descriptions or advertisements that "this product absolutely does not contain any preservatives". Some essential preservatives in food are also developing towards safety, nutrition, and pollution-free directions. New types of preservatives such as glucose oxidase, protamine, lysozyme, lactic acid bacteria, chitosan, and pectin decomposition products have emerged and have been approved for use by the state. It is recommended that everyone try to * * * foods containing natural preservatives to ensure that your health is not damaged.


Plastic industry trade model transformation and upgrading

In recent years, the price of crude oil has fluctuated greatly, which has caused large fluctuations in the price of chemical products. Under the traditional free-to-market trade model, the chemical industry often has an embarrassing situation that "upstream companies sell low and downstream companies buy expensive". With the compression of profits, price risk has threatened the stable operation of enterprises. After the linear low-density polyethylene futures were listed on large trading houses in 2007, its impact on sales and procurement has become increasingly apparent. In recent years, more and more industrial enterprises have begun to use futures instruments to resist price risks, and gradually began to explore the basis point price trading model based on futures prices. Recently, with the support of Dashang’s 2018 basis trade pilot project, Shanghai SECCO Petrochemical Co., Ltd. (hereinafter referred to as SECCO) and midstream enterprise Zhejiang Mingri Holding Group Co., Ltd. (hereinafter referred to as SECCO) Tomorrow) Strong forces, through the active promotion of Guotai Junan Futures, not only successfully carried out the basis trade experiment, but also further promoted this model as "inclusive + basis trade". People in the industry generally believe that this will become a new direction for business management and trade models. A bases on the spread price to develop the right trade As an upstream production enterprise, SECCO often encounters problems in downstream customers that are difficult to reasonably price for forward orders and that the downstream consumption changes lead to supply and demand mismatches. Traditional spot pricing and sales models are increasingly unable to meet market developments. As a trade-oriented enterprise, there will be exposure on both the purchasing and sales sides tomorrow, and the sudden large fluctuations in prices will undoubtedly bring great operational risks to the entire enterprise. "The risk cannot be eliminated, but it can be managed and transferred through financial derivatives." said Chen Fangyi, manager of the investment and research department of Tomorrow. It can be said that tomorrow is one of the earliest chemical companies to accept and introduce the basis point price model. Not only did they start to form a professional team very early to learn and study the use of futures and other financial instruments to manage price risk, but also tried twice in 2015 and 2016. Over-the-counter options trading, at the same time participated in the big business in 2018 basis trading and OTC options pilot projects. The continuous learning and practice of financial derivatives tools has enabled tomorrow to innovate its business philosophy and expand its business path. Based on the previous exploration experience, in the second half of 2018, in a business exchange with Guotai Junan Futures, tomorrow came up with an idea: Can you combine the upstream and downstream through the combination of basis price and OTC options to form a A new business model? The purpose of the basis point price is to transfer the risk brought by absolute price fluctuations. Based on the agreed futures price of a certain month, the trading parties determine the transaction price by adding or subtracting premiums and discounts (basis) on this basis. The parties to the transaction convert from the game of absolute prices in the traditional trading model to the game of basis. The basis fluctuation is small, and it has the characteristics of regression in the delivery month, which is relatively easy to grasp. During the pricing period, both parties can decide whether to carry out buying (selling) hedging operations in the futures market. As a basis buyer, you can lock in purchase or sales in advance, arrange production and manage inventory in a reasonable way. Pricing is based on the futures market, and you can freely control the pace of point price and flexibly control purchase costs. Basis sellers can lock in sales in advance, occupy market share, transfer price risk, and obtain reasonable profits. At the same time, if a service provider signs a forward order with rights in the same period of upstream and downstream, and connects the upstream and downstream of the industry into a whole business, then the basis price and the combination of options can enable upstream companies to rise or fall in the forward market. Choose a relatively high price settlement to prevent the situation of "selling cheap"; enable downstream companies to choose a relatively low price settlement no matter whether they rise or fall in the forward market, to prevent the situation of "buying expensive". The service provider pays according to the final settlement price when the order is settled. The upstream ship to the delivery location designated by the terminal factory according to the service provider's delivery requirements, and the terminal factory customer signs an order to lock the cost of raw materials and obtain

搜索历史清除全部记录
最多显示8条历史搜索记录噢~
All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas